UNIKEYS X MAIZ PCB MOUNTED CLIP-IN STABILIZERS

Recommended Installation Process:

1. Put the wires on a flat surface to test whether they are straight
2. Lube both ends of the wires with 205g0 or XHT-DBZ 
3. Lubing the stems is optional
4. Insert the stems into the housings
5. Gently insert the wires into the assembled housings
6. Install the stabilizers on the PCB and insert the stoppers
7. Stabilizer pads are optional

Packaging Design: James from Invokeys

Stem Material: PC

Housing Material: POM

Stem Inset: TPU Silicone

Wires Included: 4X2U   1X6.25U   1X7U

Clip-in stoppers included

1.6mm and 1.2mm PCB compatible versions available